When something goes wrong with the wiring in a Rochester home or building, the first instinct is usually to reset the breaker and hope it holds. Sometimes that works. Sometimes the breaker trips again before the day is out, or the outlet stays dead, or the panel makes a sound it wasn't making yesterday. That's the point at which calling makes more sense than guessing, and it's the point at which we get most of our calls from Rochester.
This city generates a wide range of electrical work. Apartment buildings and multi-unit rentals need outlet replacements, panel assessments, and code corrections between tenants. Older single-family homes on original wiring need knob-and-tube replacement, grounding upgrades, and panel work that the house has needed for years. Contractors finishing commercial tenant spaces need circuits roughed in and inspected before the build-out moves forward. We handle all of it.
Call (585) 822-6289 to get a quote before anything is scheduled.
Not every electrical job requires a full shutdown. Replacing a single outlet or switch means isolating the circuit at the breaker, which takes seconds and leaves the rest of the property running. Ceiling fan swaps, lighting replacements, and GFCI upgrades follow the same pattern. The work area goes dark. Everything else stays on.
Larger jobs are different. Panel replacements, service-entrance upgrades, and full rewires require shutting down the main. In a home where somebody is working remotely, that means planning the outage window around the morning call schedule or the afternoon deadline. In a business or rental property that has to stay open, we talk through the scope before the visit so the timing works for the people inside.
Dedicated circuit additions, outlet and switch work, and most lighting installations fall into this category. We isolate the circuit, do the work, restore power, and test. The rest of the property stays live throughout.
Panel replacements, service upgrades, and meter work require the main to come down. We confirm the outage window on the call before the visit is ever scheduled. For rental buildings and occupied commercial spaces, we coordinate the window with whoever needs to know.
A dryer, electric range, or refrigerator that shares a circuit it was never designed to share will trip the breaker eventually. The fix is a dedicated run sized for the actual load. We assess the panel capacity first, run the circuit, and install the correct outlet for the appliance. If the panel doesn't have room, that conversation happens before the work starts, not after.
Workshop equipment draws hard on startup and runs continuously under load. A welder or air compressor on an undersized circuit will trip a breaker every time it cycles. Installing a dedicated 240V circuit, sizing the breaker correctly for the load, and confirming the panel can support it are all part of the job. For garages and workshops in older Rochester properties, that sometimes means a subpanel before the circuit work can proceed.
Low-voltage work includes doorbell wiring, data runs, and the rough-in that smart home devices and security systems need to function correctly. This work often gets bundled into a larger renovation or remodel, and we coordinate it so the low-voltage rough-in is in the wall before the drywall goes up. Getting the sequence right saves a lot of remediation later.
Well pumps and irrigation systems need dedicated circuits sized for the motor load, with the correct breaker protection and weatherproof connections where the circuit exits the structure. For properties in and around Rochester that run on well water, a pump that loses its circuit is not an inconvenience. It stops the water. We handle the circuit, the disconnect, and the panel connections so the system runs reliably.
The price for electrical work is set on the call, before the visit is scheduled. We ask about the symptom, the property type, and roughly how old the wiring is. That gives us enough to explain what the job involves and what it costs. No pressure and no gimmicks, just safe, solid wiring and a straight answer about what it will take.
Three things move a quote once the electrician is on site. The first is what the fault actually turns out to be, which sometimes differs from the symptom described on the phone. The second is what has to be opened up to reach it, which in older construction can mean more wall access than expected. The third is whether the existing panel can carry the change being made, which determines whether a panel upgrade has to happen before the circuit work can proceed.
If the scope changes, that conversation happens before any additional work continues. You get the updated picture and you decide what to do next.
Call (585) 822-6289 and ask what the work involves for your specific situation.
We are available every day from 6:30 AM to 8:00 PM. When you call, we confirm what is open on the schedule and get the appointment set. For property managers coordinating multiple units, we work through the scope on the call so each visit is planned before anyone shows up.
When a problem will not keep, call and describe what you are seeing. A burning smell near a panel, an outlet that sparks, or a breaker that will not hold its reset are situations that get moved to the front of the schedule. We take short-notice work. Ask what is available when you call.
For businesses and tenants that have to stay open during the work, the outage window is confirmed before the visit is scheduled. Every job gets treated like it matters, because it does.
Rochester's housing stock covers a wide range of eras and construction types. Older homes often have panels in basements or utility rooms behind stored items. Newer construction tends to put panels in garages or dedicated electrical rooms with clear access. Either way, clear access to the panel is the single most useful thing a homeowner or property manager can do before the electrician arrives.
Properties built before the 1970s frequently have wiring types that affect how a job is scoped. Knob-and-tube wiring still active in walls and attic spaces, aluminum branch-circuit wiring at connection points, and two-prong ungrounded outlets throughout the home are all situations that change the scope of a visit. Knowing in advance that the home is older helps us prepare the right approach before we arrive.
In apartment buildings and commercial spaces, panel access through a locked electrical room or a shared basement requires coordination with the property manager or building super. Confirming access before the visit keeps the job on schedule. For tenant build-outs and renovation projects, we coordinate the electrical scope with the general contractor so the wiring is roughed in when the rest of the work needs it.
Arc-fault and ground-fault breaker coverage, surge protection at the panel level, and code-compliant wiring throughout are part of how we approach every job, regardless of property type. The work area is left as it was found. The specifics for a job like this are on our wiring and panel services page.
We cover Rochester and the communities around it throughout Monroe County. That includes Irondequoit, Brighton, Greece, Gates, and North Gates. If you are in one of those areas and need electrical work assessed, call and we will confirm whether your address falls within the current service area.
For multi-site property managers and contractors working across Monroe County, we handle calls from the city and the surrounding communities on the same schedule. The scope of the electrical work is priced before it starts, so each job is confirmed before anyone is dispatched.
Call (585) 822-6289 and we will get the work on the calendar.
Access is the property owner's or manager's responsibility to arrange. If access cannot be confirmed, the job cannot proceed. We hold the appointment until access is sorted out and reschedule as soon as it is available.
Call (585) 822-6289 and we can discuss what the options are for your situation.
Yes. We assess the work that has already been done, identify what remains, and confirm the scope before continuing. If any of the existing work does not meet current standards, we explain what needs to be corrected before we build on it. We do not assume prior work is correct without checking it.
Extension cords used as permanent wiring are a fire hazard and a code violation. The correct fix is adding an outlet where the cord is being used, which puts a proper circuit in place and eliminates the cord. We handle outlet additions as a standard job, and we can assess whether a dedicated circuit is needed based on what is being powered.
Some outdoor work cannot safely proceed in rain or in temperatures that affect materials and connections. We confirm what the schedule allows when you call, and if conditions on the day of the visit are not suitable, we reschedule as promptly as possible.
When a home or building runs electric baseboard heat, space heaters, or the dedicated circuit that feeds a heating unit, the panel carries a sustained load that older 100-amp services were not designed to handle. A 200-amp upgrade involves replacing the main breaker panel, updating the service entrance and meter connection to match, and running a load calculation to confirm the new panel is sized for what the property actually draws. We confirm the scope and the price on the call before the visit is scheduled.
Running new wiring through finished ceilings sometimes requires opening them, depending on the route and the construction. In some cases, access through an attic or a wall cavity allows the work to be done without disturbing the ceiling at all. We assess the best route before starting and tell you what access the job requires.
Two-prong outlets are a sign the circuit was never grounded, which is common in homes built before the mid-1960s. The fix depends on the wiring present. In some cases a GFCI outlet can be installed on the ungrounded circuit and labeled correctly. In others, running a new ground conductor back to the panel is the right approach. We assess the wiring during the visit and explain which option applies before any work is agreed.
The call is short. You describe what is happening, we explain what it involves and what it costs, and you decide whether to schedule. There are no forms to fill out and no waiting for a callback.
Call (585) 822-6289 during our hours, 6:30 AM to 8:00 PM every day, and reach someone who can scope the job on the call.
That is how it works with Irondequoit Electrical Company. Call now and we will set the appointment.
Wiring and panel work nearby: Gates, Brighton, North Gates.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps Rochester, Monroe County homes and businesses running safely. Every job starts with a clear scope and a confirmed price before anything is scheduled. The table below covers what each service includes, who it fits, and what is practical to know before you call.
| Service Type | Scope of Work | When You Need It | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrades, Subpanel installation, Load calculations, Whole-home surge protection at the panel | Homes adding an EV charger, electric range, or large new load that the current service cannot support | Panel work is finished to code and is the right time to add whole-home surge protection while the panel is already open. |
| Heat Tape Installation | Dedicated circuit for heat cable, GFCI-protected weatherproof outlet, Roofline and exposed pipe circuit wiring | Homes near Lake Ontario where ice damming and freeze-thaw cycles are a recurring winter problem | Heat tape needs a properly wired dedicated circuit to operate reliably and safely through the coldest months. The tape or cable product is the homeowner's item. |
| Dedicated Appliance Circuits | Dryer and electric range circuits, Refrigerator and large appliance circuits, Electrical supply for heating and cooling units, Hot tub and workshop circuits | Any appliance or load that cannot share a circuit without tripping the breaker | Each dedicated circuit is sized for the specific load it feeds. We handle the wiring and confirm the panel has capacity before the circuit is run. |
Call (585) 822-6289 and we will walk through what your job involves, confirm the scope, and set the price before anything is scheduled.
(585) 822-6289